WILSON ELECTRONICS

• Installs in minutes – no special tools required
• Portable – can easily be moved between vehicles
• Wireless operation - no physical connection to cell phone or data card
• Supports multiple users in vehicle

• Amplifies signals to and from the cell site on both 800MHz and 1900MHz frequencies

• Microprocessor-controlled circuitry ensures reliable operation within regulatory standards
• Built-in antenna in the phone cradle permits hands-free operation
• Improves signals for both voice and data
• Includes our high efficiency 12” 301103 exterior magnet mount antenna
• Six times more power than a typical cell phone
• DC power supply included (cigarette lighter type), AC power supply sold separately
• FCC and IC Type Accepted

• MSRP: $374.95

Antenna and Accessory Options:

• NMO Mount Cellular Antenna 301104
• NMO Trucker Cellular Antenna 301112

• Trucker Mirror Mount Antenna 301101

• Coax Cable Extensions (Type RG-58)

Specifications:

Part Number: 801231
Frequency: 824-894 MHz / 1850-1990 MHz
Gain: 40 dB / 45 dB
Max Output Power: 1.5 watts
Max RF: 31.7 dBm
Noise Figure: 3.5 dB nominal
Flatness: ± 3.5 dB / ± 4 dB
Isolation: > 90 dB
Power Requirements: 6V, 0.6A - 2A (subject to uplink power)
Connectors: SMA Female
Dimensions: 3.25 x 3.25 x 1 (inches) or 9.6 x 8.1 x 3.8 (cm)
Weight: 4 oz or 0.11 kg

Wilson Electronics 801212 Wireless Vehicle Amplifier Kit

Includes 301103 12" magnet mount antenna, inside antenna

and 12 volt power supply

Complete kit-Nothing else to Buy!

$277.95

Shipping via UPS Ground is $12.65

Works will all phones and all cellular companies except Nextel

Features:

• Allows multiple phones and data cards to be used simultaneously
• Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE
• Up to 3 watts maximum output power
• Power control logic ensures maximum output power is within cellular standards
• Requires no physical connection to cell phone or data card
• Provides high signal-to-noise ratio
• protects cell sites from harmful interference
• Dual band - Cellular and PCS
• FCC and IC type accepted

• MSRP: $429.95

Specifications:

Part Number		801212
Frequency		824-894 MHz / 1850-1990 MHz
Gain		40 dB / 45 dB
Max Output Power		3 watts
Max RF		+35 dBm / +10 dBm
Noise Figure		3 dB nominal
Flatness		± 3 dB / ± 4 dB
Isolation		> 90 dB
Power Requirements		6 V, 3 A max
Connectors		FME-Male 50 ohms
Dimensions		4.5 x 3.5 x 1.25 (inches) / 11.43 x 8.9 x 3.2 (cm)
Weight		1.5 lbs / 0.7 kg

________________________________________________________________________________________________________________________________________________________________

Wilson Electronics 801101 Wireless 800 MHz Vehicle Amplifier

$217.95 Shipping via UPS Ground is $12.65

Features:

• Maximum 3 watts output power
• No physical connection to your cell phone or cellular data card
• Works on all generations of CDMA, TDMA, GSM and high-speed data technologies
• Power control logic ensures maximum output power is within cellular standards
• Automatic gain adjusting in the event of oscillation and/or overload
• Automatic gain control
• Automatic shutdown on overload
• Allows multiple phones and cellular data cards to be used simultaneously
• DC power supply included - AC power supply sold separately
• Slim low profile inside antenna included (301127)
• FCC and IC type accepted

Antenna and Accessory Options:

• NMO Mount Cellular Antenna (301104)
• NMO Trucker Cellular Antenna (301112)
• Magnet Antenna (301103)
• Trucker Mirror Mount Antenna (301101)

• Coax Cable (RG58)

Specifications:

Part Number		801101
Frequency		824-894 MHz
Gain		40 dB
Max Output Power		3 watts
Max RF		+35 dBm / +10 dBm
Noise Figure		4 dB nominal
Flatness		± 3 dB / ± 4 dB
Isolation		> 90 dB
Power Requirements		12 V, 0.5-1.5 A max
Connectors		FME-Male 50 ohms
Dimensions		5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm)
Weight		1.32 lbs or 0.6

Typical Installation:

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Wilson Electronics 801201 Dual Band Vehicle Wireless Cellular Amplifier

                       $261.95    Shipping via UPS Ground is $12.65





Wilson Electronics 801212 Wireless Vehicle Amplifier Kit

Complete kit-Nothing else to Buy

$309.95

Shipping via UPS Ground is $12.65






Works will all phones and all cellular companies except Nextel

                    Features:

• Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE
• Up to 3 watts maximum output power
• Power control logic ensures maximum output power is within cellular standards
• Requires no physical connection to cell phone or data card
• Provides high signal-to-noise ratio
• protects cell sites from harmful interference
• Dual band - Cellular and PCS
• FCC and IC type accepted
• MSRP: $429.95                                                                   Specifications:

Part Number
: 801212

Frequency
: 824-894 MHz / 1850-1990 MHz

Gain
: 40 dB / 45 dB

Max Output Power
: 3 watts

Max RF

+35 dBm / +10 dBm

Noise Figure

3 dB nominal

Flatness

± 3 dB / ± 4 dB

Isolation
> 90 dB

Power Requirements
6 V, 3 A max

Connectors
FME-Male 50 ohms

Dimensions
4.5 x 3.5 x 1.25 (inches) / 11.43 x 8.9 x 3.2 (cm)

Weight

1.5 lbs / 0.7 kg